Product Overview

The Schroth 6 Point Pull Up Profi Harness 3x2 is a professional motorsport restraint system designed for race, track and competition vehicles requiring FIA-approved driver safety equipment.

Using a six-point configuration with 3-inch shoulder belts and 2-inch lap belts, the Profi harness is designed to provide secure driver restraint, excellent load distribution and a precise fit when used with compatible motorsport seats, harness bars and mounting points.

The pull-up lap belt adjustment makes tightening the harness straightforward once seated, making this configuration especially well suited to race and track cars where access around the seat can be limited.

The harness can also be used with compatible XC3 fixed and sliding bucket seat mounting solutions, allowing it to form part of a complete XC3 motorsport seating and restraint setup.

Key Features

Genuine Schroth Motorsport harness
6-point racing harness configuration
3-inch shoulder belts
2-inch lap belts
Pull-up lap belt adjustment
Twin anti-submarine straps
Rotary cam-lock buckle
FIA 8853-2016 approved
Suitable for compatible HANS / FHR systems
Designed for race, track and motorsport use
Compatible with selected XC3 fixed and sliding bucket seat mounting solutions
Professional motorsport construction

Product Description

The Schroth Profi range is designed for serious motorsport use where driver restraint, comfort and repeatable adjustment are critical.

The 3x2 configuration combines wide 3-inch shoulder belts with 2-inch lap belts, helping the lap section sit securely across the pelvis while providing a comfortable and controlled fit.

The six-point layout uses two shoulder straps, two lap straps and two anti-submarine straps to help maintain the driver's seating position during heavy braking, cornering and impact loading.

The pull-up adjustment allows the lap straps to be tightened by pulling upward towards the centre buckle. This is particularly useful in tightly packaged cockpits where access between the bucket seat, transmission tunnel and door sill can be limited.

A central rotary cam-lock buckle securely connects all six straps while allowing rapid release when required.

3-Inch Shoulder / 2-Inch Lap Configuration

The 3x2 design combines:

3-inch shoulder belts for broad upper-body load distribution
2-inch lap belts for secure positioning across the pelvis
Twin anti-submarine straps for a full six-point restraint system

This configuration is well suited to competition vehicles using side-mounted motorsport bucket seats and correctly positioned harness mounting points.

Pull-Up Adjustment

The pull-up design refers to the direction used to tighten the lap belts.

Rather than pulling the lap adjusters down and away from the buckle, the driver pulls the webbing upward towards the centre buckle.

This can make it easier to achieve a tight, consistent fit once seated, particularly when using deep-sided motorsport bucket seats.

Compatible with XC3 Seat Mounting Solutions

The Schroth 6 Point Profi Harness can be used with compatible XC3 fixed and sliding bucket seat mounting solutions.

Selected XC3 seat mounting systems incorporate provisions for harness installation, allowing the seat and restraint system to be integrated into a complete vehicle-specific setup.

This makes the Schroth Profi harness a strong option for customers building an XC3-equipped BMW track or motorsport car.

Always confirm that the vehicle, seat mount and harness mounting arrangement provide the correct belt routing and mounting angles required by Schroth and the relevant motorsport regulations.

Suitable Applications

Ideal for:

Track cars
Race cars
Circuit racing
Time attack
Hillclimb
Sprint competition
Motorsport builds
FIA-approved bucket seat installations
HANS / FHR-equipped drivers
Vehicles using compatible XC3 bucket seat mounting solutions

What’s Included

1 x Schroth 6 Point Profi racing harness
2 x shoulder straps
2 x lap straps
2 x anti-submarine straps
Central rotary cam-lock buckle
Integrated adjusters and supplied mounting hardware

Exact mounting hardware may vary depending on the harness specification and installation method.

Installation

Correct harness installation is critical to occupant safety.

The harness must be fitted to suitable motorsport mounting points and installed in accordance with Schroth's current installation instructions and the regulations applicable to your vehicle or competition.

Harness angle, shoulder belt routing, anti-submarine strap position and mounting hardware should all be checked carefully during installation.